Today's tutorial is for the youngest members of the
Approx. 7.5" by 11" tall (buttoned) |
Here's what you need:
Materials:
Cotton (at least 8.5" wide by 14" tall per bib) good quality to withstand lots of washing!
1 white hand towel
1 set of snap fasteners
Method: Assume 1/4" seams
Download the bib template here.
1. Using the bib template, cut out 1 from the cotton and 1 from the towel.
2. Place right sides together and sew around all sides, leaving a 2" gap in the bottom edge.
3. Carefully snip into all the curves at 1cm intervals. Turn bib right sides out through the gap. Press well and turn under the raw edges of the gap.
4. From the top side, sew around the bib 1/8" from the edge closing the gap as you go.
5. Attach snap fasteners according to the manufacturers instructions. I found these KAM fasteners really easy to use (for similar snaps and pliers see here).
And you're done! Attach to baby (sorry, I don't have one of those!) and feed!
And if you have a real
Have fun!
(I'll have more on my patchwork bibs tomorrow!)
Jude xo
Oh, they're adorable!
ReplyDeleteAmazing blog really i must appreciate your all stuff.
ReplyDeletegift set
Nice descriptive Article!!!
ReplyDeletedrool bibs
I like your all information about baby gift and your blog is so nice.
ReplyDeletepicture frames for baby